Linear 84 C / 184 C

Technical Specification (SUPERSIL 84 C / 184 C)

Manufacturers Specification for 84 C / 184 C Concealed Perforated / Plain Panel False Ceiling System.

Panel Details (Aluminium):  

Supersil make Square edge panels, 84 / 184 mm wide x 15 mm deep x length up to 5 mtr. With 25mm recess flange formed out of 0.50 mm thick (TCT) aluminium alloy (AA) 8011-H3 fixed on carriers. Panel shall be powder coated on external surface only.

Panel Details (Galvanized Steel):    

Supersil make Square edge panels, 84 /184mm wide x 15 mm deep x length up to 5 mtr. With 25mm recess flange formed out of 0.50 mm thick (TCT) galvanized steel fixed on carriers. Panel shall be powder coated on external surface only.

Perforation Details:      

  • 2mm dia, 5mm Centre to Centre in diagonal Pattern
  • 2mm dia, 5mm Centre to Centre in regular Pattern
  • 2mm dia, 7mm Centre to Centre in diagonal Pattern

Carrier Details:        

Carrier, 28 mm wide at the bottom x 43 mm deep formed out of 0.50 mm thick galvanized steel sheet stove enameled black with protruding ears to hold the panels in a module of 100 / 200mm.

Installation Details:          

The carrier shall be suspended from slab by 4 mm dial galvanized rod with special height adjustment powder coated clips made out of spring steel at maximum 1.2 to 1.5 mtr. Centre to centre. The 4mm dia galvanized rod shall be fixed to slab by forming one end “J” shape with roll inserts. The edge profile formed out of G. I. Sheet of the size 18 mm x 20 mm shall be fixed on the perimeter of the walls.