EXTERIOR LOUVRES (SL 4)

Technical Specification (SUPERSIL 84R SL-4)

Manufacturers Specification for 84R SL-4 Exterior Plain Louvre System

Panel Details (Aluminium):

Supersil make 84 R, Round edge panels, 84mm wide x 15mm deep x length up to 5mtr. Formed out of 0.71 mm thick (TCT) Aluminium alloy 8011-H3, fixed on Louvre Carriers. Panels shall be powder coated on both the surfaces with special exterior SUPERCOTE powder to enhance property of Fadedness Resistivity.

Panel Details (Galvanized Steel):

Supersil make 84 R, Round edge panels, 84mm wide x 15mm deep x length up to 5mtr. Formed out of 0.55 mm thick (TCT) Galvanized Steel as per IS-513 fixed on Louver Carriers. Panels shall be powder coated on both the surfaces with special exterior SUPERCOTE powder to enhance property of Fadedness Resistivity.

Carrier Details (SL-4):

Black enameled Galvanized Steel Carrier of 33mm wide x 86mm deep x 0.6 mm thick in a standard length of 8’ with cutouts to hold the panel in a module of 86 mm centre to centre at a distance of 1 mtr. Carrier and Suitable structure shall be powder coated on exterior face to enhance properties of Fadeness and corrosion resistivity.

Installation Details:

GS clit shall be fixed on Vertical Columns with dash fasteners at distance not more than 1 mtr. Centre to centre on which Tubular Stud sections will be laid with corrosion proof screws and on this rigid structure carrier shall be fixed vertically at distance of 1 mtr. Centre to centre. Panel shall be clipped to black carriers.