U SHAPED 25*50*25

Technical Specification(U SHAPED 25*50*25)

Manufacturers Specification for Supersil U Shaped Screen 25*50*25 mm Panel (50mm Gap between two Panels) Exterior Cladding System.

Panel Details (Aluminium):

Supersil make Square edge panels, 25 * 50 * 25 mm, length up to 2.5 mtr. With formed out of 0.56 mm thick (TCT) aluminium alloy (AA) 8011-H3 fixed on carriers. Panels shall be powder coated on visible surfaces with special exterior SUPERCOTE powder to enhance property of Fadeness Resistivity.

Panel Details (Galvanized Steel):

Supersil make Square edge panels, 25 * 50 * 25 mm, length up to 2.5 mtr. With formed out of 0.50 mm thick (TCT) galvanized steel fixed on carriers. Panels shall be powder coated on visible surfaces with special exterior SUPERCOTE powder to enhance property of Fadeness Resistivity.

Carrier Details:

Carrier, 18 mm wide at the bottom x 42 mm deep formed out of 0.60 mm thick galvanized steel sheet stove enameled black with protruding ears to hold the panels in a module of 100 mm.

Installation Details:

GS clit shall be fixed on Vertical Columns with dash fasteners at distance not more than 1 mtr. Centre to centre on which Tubular Stud sections will be laid with corrosion proof screws and on this rigid structure carrier shall be fixed at distance of 1 mtr. Centre to centre. Panel shall be clipped to black carriers.